WEOLE ENERGY

Created in 2007, Weole Energy supplies small and medium-capacity wind turbines suitable for all requirements for residential customers, farmers,

businesses and local authorities.

 Weole Horizon

Following in the footsteps of large wind turbines, the market is now beginning to expand, with technological innovations allowing residential customers, businesses and local authorities to use small and medium-sized wind turbines that are both environmentally efficient and economically viable. In this fast-growing sector, Weole Energy is responding to increasing demand from the market and has a network of installers covering all of France.

 Weole vision

The aim of this capital injection is to support Weole Energy’s development, with three main objectives :

-to form strategic partnerships with companies in the sector;

-to offer comprehensive solutions combining technological innovation and customer support;

- to make wind turbines into a mass market product for residential customers, businesses and local authorities, in order to ensure the industrial development of a still-emerging market.

The Company has announced a €2 million capital injection to speed up its expansion in France.

 

Following start-up equity of €85,000, Weole Energy is obtaining investment from Crédit Agricole Private Equity, via its FCPR Capenergie fund, and Direct Energie, France’s leading alternative energy supplier. The two shareholders will each invest €1 million.

Source : Weole 

More information :www.weole-energy.com

Elena Energie

Elena energie is a french company developing a shrouded wind turbine with optimised aerodynamics and regulated cross flow.

Much smaller than traditional turbine, Elena significantly increases the overall annual efficiency and range of applications of wind turbines, while reducing noise pollution. Its rational axis can be either horizontal or vertical, allowing a variety of installation configurations. The turbine's energy management system also enables it to be coupled with a number of other energy sources. 

Its main application is the production of electrical energy for individual or collective housing whether or not it is connected to an urban zone or rural zone electrical grid.

Others applications : commercial building, telephony, remote security systems, transport, agriculture, leisure.

Source : Elena Energie

More informations : www.elena-energie.com

Clean fireplace

Fund will be submitted to the 1st International Exhibition of Renewable Energy and Energy Management from 17 to 19 November at the CNIT in Paris. 
 
It is on a stand of almost 90m2, as funds will present its latest innovation: the 1st fireplace cleaner CO ZERO. This revolutionary technology is to integrate a catalyst type metal avaloir directly in the home. The provision of such a device to a chimney performance, type "new generation" as Ulys ® 700, allows a deduction result of carbon monoxide and other compounds. In fact, in contact with the active ingredient developed by FUNDS ® and deposited on the surface of the catalyst to oxidize organic pollutants and become clean

Sources : Fondis website

More informations on : www.fondis.com

Eco&Mobilité

Transport solutions supporting sustainable development.

The company Eco & Mobilité is located in the Poitou–Charentes department. Just around the corner from Futurescope and the motor racing circuit at Vigeant, the company has doubtless benefited from these influences in developing its vehicles: Projecting the future and technology.

Arising from the FORMES & OUTILLAGES group, a specialist in modelling and car bodywork, ECO & MOBILITE has created a range of electric vehicles under the ELV brand.

The Company have devoted to the aim of creating a range of electric vehicles(EV) or electrically-assisted vehicles (EAV), able to serve sectors such as tourism, personal transport, advertising, parcel delivery services, travelling sales, highway maintenance, etc

Source : Eco&Mobilite website

More informations on : www.eco-mobilite.com

Hydbrid vehicle from Renaut Trucks

Fuel consumption and CO2 emissions reduced by almost 30% for collecting household waste in the Greater Lyon area with the Renault Trucks hybrid vehicle In October 2008, Renault Trucks and SITA (Suez Environnement) will be launching operational trials in the Lyon urban area of the very first RT hybrid truck to be used for collecting the city's household refuse: the premium Distribution Hybrys Tech.Fitted with a hybrid engine which, on its own, reduces CO2 emissions by almost 20%, this dedicated vehicle will also be equipped with an additional battery designed to supply the refuse collector. This battery is recharged during the vehicle's deceleration and braking phases. It will therefore not be relying on a single engine - enabling the total reduction in consumption, and therefore emissions, to reach almost 30%.

The principle of hybrid (or "parallel") technology developed by Renault Trucks is very straightforward: the vehicle's kinetic energy is recovered during braking or deceleration and converted into electricity. Stored in a battery located in the wheelbase, this electricity then supplies the MDS (Motor Drive System) electrical motor which provides power for starting the vehicle, supplying its electrical functions and propulsion up to 20 km/h. This means that the diesel engine is only used for those phases during which it consumes the least, i.e. when travelling. Apart from cutting emissions, the use of an electric motor in hybrid technology also significantly reduces noise levels.Following the tests in Lyon, an initial series of 6 pre-production Renault Trucks hybrid vehicles will be operated by a number of customers to apply this technology to other urban distribution activities.

Source : Renault truck

More information on : www.renault-trucks.com

ROCTOOL Innovative Molding Technologies

Roctool SA is France-based company that is engaged in the research, development and licensing of molding technologies. The Company develops several processing technologies, such as the Cage System, an inductive heating process, which is a patented molding technology that heats tool surface by induction, as well as conventional composite processes, including resin transfer molding (RTM), thermo compression and thermoplastic injection, among others. 

Roctool SA cooperates with a number of manufacturers and material providers from such sectors as automotive, sport and leisure, and aircraft. The Company offers licenses of its patents to companies in many different markets, comprising automotive and transportation, construction and medical equipment. Roctool SA, which is headquartered in Le Bourget du Lac, France, is also present in the United States.

More information : www.roctool.com

Source : Roctool

NEOSENS : Pure Sensor Solutions

Neosens was founded in 2001 in Toulouse, France by Laurent Auret after conducting a successful trial on the use of MEMS (Micro-Electro-Mechanical Systems) for sensor applications at the ELTA - AREVA Group in partnership with the LAAS-CNRS (Laboratoire d’Analyse et d’Architecture des Systèmes).  Since then, Neosens has acquired a unique technology from INRA for the measurement of biofilm to further strengthen its product line. 

Today, based on its expertise in electro-chemistry and microelectronics, Neosens develops and markets a range of innovative sensor solutions based on MEMS technology. The products include, among others, in-situ sensors used to measure dissolved oxygen levels in real-time, and sensors that continuously monitor biofilm and scale formation in heat exchangers and process piping. Neosens, a pioneer in its field, offers a new generation of solutions that enable the continuous monitoring of water quality for industrial applications such as cooling systems, pulp & paper, food & beverage processing, and ultra-pure water. “In the water industry, the monitoring of pollutants, such as micro-organisms and mineral deposits, is paramount. In addition, the consumption of chemicals needed to clean water systems must be reduced to limit the impact on the environment. Neosens has the answer to this problem by continuously monitoring the growth of biofilm and thereby measuring the efficiency of cleaning processes. The Company announced in February  the closing of 2.5M€ in capital funding. The group of investors, led by SOFINNOVA Partners, includes the Belgian fund, Capricorn Cleantech Fund and GALIA Gestion, and the original investors, ICSO Private Equity and IRDI. 

More information on : www.neo-sens.com

Source : Neosens

MHS Equipment : PEM Fuel Cells

MHS industries is a French High Technology group that deals in electronic components and systems as well as equipment for the High Reliability markets such as Space, Avionics and Bionics…

The headquarters are based in Nantes.MHS Industries via its subsidiary MHS Equipment, designs and manufactures UHV thin layer deposition systems. It has finalized a process/equipment combination for producing PEM Fuel Cells Membrane Electrode Assemblies using plasma deposition techniques. MHS Equipment is producing Ultra High Vacuum (UHV) equipment for thin film deposition in the semiconductor and renewable energy areas. Implemented technologies are PLD (pulsed lased deposition), PSD (plasma sputtering deposition), PECVD, and MBE (molecular beam epitaxy). The experience gained from the engineering and fabrication of such advanced systems together with close private-public research cooperations has lead to the development of a new production equipment specifically designed for the elaboration of fuel cell MEAs. With this tool, the whole MEA (incl. membrane and electrodes) is produced in one single machine under UHV conditions with the help of PECVD and PSD technologies.

More information on : www.mhs-equipment.com

Source : MHS industries

Nanorgysol

Nanorgysol project aims to explore a great number of materials and concepts in order to evaluate their potential and to be able to make at the end of this project the strategic choices in term of paths to develop. This project is financed by the National Agency of Research (ANR) within the framework of the “Solar Photovoltaic" Program.

Thus, the results awaited at the end of this project are to obtain with one of the developed concepts: 
      -   a solar efficiency of 5% on 1cm² glass substrate,
      -   the demonstration of a solar efficiency on a surface of 100 cm². 
The lifetime of the most promising cells will be measured. 

These considerations were carried out within the framework of the network NANORGASOL, supported by CNRS, set up in April 2005 and will be relayed by the National Institute for Solar Energy (INES) based in Chambéry, which counts CEA and CNRS as partners.

More information on : www.nanorgysol.cea.fr

Source : CEA 

Bionersis :

A pioneer company in its sector, Bionersis is a global player in the production of renewable energies and the reduction of greenhouse gases. Bionersis recovers the landfill gas generated by household waste sites.
Bionersis designs, installs and exploits installations to:

• Recuperate and eliminate landfill gas,
• Produce and export electricity
• sells the electricity produced from the combustion of the harnessed methane
• sells the carbon credits from the combustion of the methane.

Process : A network of wells (vertical or horizontal) is installed in the landfill site.This network is interconnected and linked by a central collector to an exhaust flare. The exhausting depresses the site and forces the extraction. After being processed once, the landfill gases generated by the landfill waste are eliminated under controlled conditions. This system is more efficient than simple gas vent systems (passive ventilation), which, in the majority of cases encountered in the field, allow, at best, 10 to 15% of the landfill gas generated by the waste to be sent into the atmosphere without being destroyed. During this phase, Bionersis analyses the flows, as well as the characteristics of the gas emissions.An additional installation for processing and cleaning the gas will enable us to produce a gas that can fuel a generator that produces electricity sold directly to the consumer or delivered through the network. 

Bionersis has performed a private investment transaction with qualified investors, in the form of a capital increase which made it possible to raise 15 millions euros

More information on : www.bionersis.com

Source : Bionersis website